Search results

The status data block in the lower left corner of the map page is there on my 7" screen but not on the 10", what am I missing? I can't find the option to add the data block to the screen.

No change in results when I turned off the transponder the other aircraft could not see me but he was able to see other traffic. We dont know if one of them became the new host. As an aside I was 10 miles from Prescott and the tower was able be identify me on their radar. The other airplane is...

Thank you for the response, we are planning a flight in the morning from P52 to E25. I will turn off my transponder and see what happens. Is there a way to tell what ADS-B station or stations I am picking up?

My airplane is all Skyview system, w/mode s, squawking 1200, orther airplane took off 2 or 3 minutes after me and passed by, up to 5 miles ahead, reversed course. We are flying out of P52, 90 miles north of Phoenix, AZ. I was seeing trafic from P52, sez, and prc. Altitudes up to 9000 msl for...

In my flight today ADS-B was displaying traffic. Status was "partial" and weather was being reported. Another ADS-B equiped airplane could see all the same traffic I could see but he could not see me. I could see him no problem, any thoughts?

Check the polarity on the LED, I have hooked them up backwards and they dont work.

Check the latest guide: SkyView Pilot’s User Guide - Revision L, page 7-23

The shunt is configured as fig C in the Skyview installation guide, that is between the battery and main buss. I have checked continunity at the EMS connector and checks ok. The amp reading is always "0" I have loaded the system with engine off and all electrical on it still reads "0". Any...

Flying today in traffic lots of targets on the skyview screen. North of Phoenix at 4500' I lost the airplane symbol and it was replaced with a yellow traffic dot with (00), after a couple of turns I realized I was the target. The PFD screen also had the "TRAFFIC" alert. Can anyone tell me...

There are other sources but here is one. TOOL,CRIMPING,HAND,MOLEX,FOR .062 INCH AND .093 INCH CONTACTS Jameco Part no. 227491 Manufacturer WALDOM ELECTRONICS Manufacturer no. W-HT-1921 Catalog 123 , page 60

I have Waldom crimper ($15) that I have used for 10 yrs. Works fine for the occasional crimps as I recall its called the Hobby or expeimenter model.

I did my first flight today out of P52 (Cottonwood,AZ) and all I can say is WOW! There was a skydive jump plane 3100 ft above me climbing and watched him for the next 5 minutes or so. Another target showed from Sedona, I could not make visual contact on the target but it was moving away. I had...

That was the problem, after the serial port configured everything works great.

I did not do anything specific with the serial ports. I'm not sure what needs to be done there.

I finished the installation on the ADS-B box and software update to 5.0 and transponder update. I have the slow flash on the box and my connections double check. I notice in the setup menus the ADS-B option is grayed out. Also on the map info page the WX option does not show. My tests are on the...

I'll ask the same question since there is no response, How about adding a page revision and line revision letter. I have notes in my manuals and don't like reprinting each time a manual revision comes out. At least tell us the pages that changed so we can just print those pages. Any help on...

After three test flights and 2+ hours with no issues, I got a temperature audio warning when keying the PTT at low power settings entering the pattern. I did not see a spike on the screen, but it sounds similar to RF problems others have had. I plan to go fly again and get more specific. Any...

I am using the capstan servo's, looking at your picture, the bracket looks closer to the capstan than mine. On my servo the distance between the capstan and the bridle cable is just under the diameter of the cable, so the cable doesnt pop off. Give support a call and give the the spacing from...

My advice (free) is to go get your instrument rating and fly behind the equipment you think you want. Then you will have a much better idea on what will work for you in your airplane.

I'm running 3.2 and I only waited a few seconds before rebooting. Went out today and normal start and bootup. No problem I think your correct the pull down of the battery on start may be the issue.