Search results

  1. M

    ASI differences

    Thank, I'll try recalibrating. Just a thought - if I had connected the AOA and pitot tubes the wrong way round what would I expect to see? Thanks Peter
  2. M

    ASI differences

    Is there anything in the D10A which compensates for position error on the pitot using the AOA input? The reason for asking is that I am seeing differences between the airspeed reading on my RV9A on the Dynon compared to the mechanical ASI - but only at lower airspeeds. Above about 90kts they are...
  3. M

    Any reason to upgrade standalone D10A?

    Is there any reason to upgrade a standalone D10A from version 3 to 4. The unit is connected to a Garmin GNC300XL which works fine on the HSI and doesn't support vertical guidance Thanks Peter
  4. M

    How close is too close?

    How close can I safely install the EDC to the tail strobe wiring? The wire is screened with the screen terminated to ground at the strobe power supply only. Alternatively, how close can the EDC be to the radio coax (RG400) and antenna such that it will not be affected when transmitting? Thanks...
  5. M

    AOA Audio Output

    Please can you let me know when we are going to get a release for the 10A with the audio output for the AOA warning enabled. Thanks Peter
  6. M

    Multidrop serial on D10A?

    Two quick questions. Any reason not to connect the altitude serial output to two devices in parallel (GNC300XL + transponder)? Second any reason not to use a 1/4" stereo jack as a panel connection for the computer serial port? This is the system that Sandel use. Thanks in anticipation Peter
Top