Search results

Folks I've got a EFIS-D100 it was showing not the same heading as the gps when in course so I tried to re adjust Inclination (MAGINC) and Intensity (MAGINT) an re calibrating now it is showing almos the opposit heading from the real one. Error of almost 180 degrees! I tried to do this adusts...

Hi, I think this solution here will solve the problem I am having describe on my post below: http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1255954910/3#3 I got GPS on HSI but can't access NAV function on AP74, it does not engage and the button does not come lit when pressed. I think it...

Hi Jake, indeed I wrote normally closed but I meant normally open, fact is I did not need to replace it to make the AP work as it is working today. :D My only problem now is to access NAV function on AP74, it does not engage the button does not come lit when pressed. I think it has something...

Hello Dynon Global Moderator, I configured the HSI serial COM 1 to NMEA (auto rate for transmission) and the GPS Garmin 296 to NMEA out (9600 baud rate). After that I finally got input from GPS on the HSI (can see data from GPS, winds aloft etc)... BUT still not able to execute AP74 NAV...

Re: Problem installing Autopilot on EFIS D100, AP7 Hi! After doing some ajusts on servo arm (put it perpendicular to the command rod) then the servo test went well and... I made the AP test fly and all went well!!!!! Nice! very happy with it Dynon. Servos SV32 are ok for may PATRIOT 150, I...

Hi! After doing some ajusts on servo arm (put it perpendicular to the command rod) then the servo test went well and... I made the AP test fly and all went well!!!!! Nice! very happy with it Dynon. Servos SV32 are ok for may PATRIOT 150, I will post the installation pictures soon as reference...

Hi! I made the AP test fly and all went well!!!!! Nice! very happy with it Dynon. I configured the HSI serial com and got input from GPS Garmim 296 on the HSI BUT... still not able to execute AP74 NAV function, on test flight the only modes that worked were HDG and ALT. Anyone knows if there...

Adding a question to the post above, should the GPS appear on the DSAB network status screen that list all networked devices? Oh...by the way, the AP74 NAV button is not engaging... On the D-100 pilot's guide page 6-9 says: "HSI Menu Structure NAVSRC - This is used to choose what...

Hello, all. I had installed a Garmin 296 that was hooked to the COM 1 EFIS D-100 through the Garmin provided data cable (1 wire), but sometimes on HSI I see a GPS warning (don't remember what it says) but only sometimes most of the time GPS does not appears on HSI, any ideas on what is...

Re: Problem installing Autopilot on EFIS D100, AP7 Hello, all. First things firts. - the disconnect switch was a normally closed one, so I did not replaced it. The AP passed on Servo Test now... now it is moving the stick a lot in the expected directions. It is also making the stick hard...

Hello, all. First things firts. - the disconnect switch was a normally closed one, so I did not replaced it. The AP passed on Servo Test now... now it is moving the stick a lot in the expected directions. It is also making the stick hard when I on ground engage the AP on HDG function. But I...

Re: Problem installing Autopilot on EFIS D100, AP7 First thanks JakeJ and David for the replies! Tomorrow (Saturday) I will disconnect the servos from the control system and do the checks suggested. You and others suggested in other threads that I should verify/try: a) put the rod end...

First thanks for the reply Dynon! Well the aircraft I installed the servos and AP74 is a PATRIOT 150 LSA link below: http://www.silverskyaviation.com/pages/patriot150.html During Servo Test the servos were not moving at all (just jitters, clicks and clank sounds when I start test with stick...

Re: Problem installing Autopilot on EFIS D100, AP7 Hi JakeJ, that may be the reason. I will check saturday and I post here if it was it. Thanks for the suggestion. If anyone has any other please post cause I will only have time to try this saturday. Thanks again. Alex.

One last thing, I linked the EFIS D-100 with the Garmin 296 GPS through one wire on the data cable... would that affect in anyway the servo test I described above ? I did not notice either if the EFIS recognises and receives data from the GPS yet... how do I chek if the connection between then...

Re: Problem installing Autopilot on EFIS D100, AP7 Hi David, First of all I re-posted this topic on the right place, please follow the link: http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1255610330 But regarding your answer I think I did not made myself clear. What happens is that...

Hi Jaba-Who, your servo test did not move but on taxi (what speed?) it did? Works on flight now? I may have a very similar problem... please look my post: http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1255610330 Do you suggest anything? I was afraid of test flying it after it did not...

I am refusing to do fly servo test when ground test is not moving right but I read this post: http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1252581640/1#1 DYNON SUPPORT would that make sense? I mean, SV32s not moving in servo test but perfoming correctly in flight? Should I try? Please...

Hi again! What is happening to me is pretty much what happened to the fellow on this post: http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1226713787/0 The difference is that mine only moves a bit in one direction when servo test stars with the stick off center, with stick centered it...

Hi, That is almost exactly what is happening to my AP74-EFIS D100 and SV32s installation. The difference is that mine only moves a bit in one direction when servo test stars with the stick off center, with stick centered it does not move at all only jitters and clicks. Was that problem solved...