Search results

I use a USB stick on which I have about fifty saved .gpx routes. It worked flawlessly with v10.x I recently upgraded from Skyview v10.x to v12.0 and since the upgrade my Skyview only recognises approximately the first twenty (alphabetically) .gpx routes! I have tried different USB sticks in...

Q1. When will the Dynon Transponder be available to purchase in the UK (via Harry Mendelssohn)? Q2. How easy will it be to change the transponder setting on screen, i.e. will I have to navigate through several 'pages' to change the squawk? Q3. In a multiple screen system, can the squawk be...

Planning my RV8 wiring runs/lengths: am I correct in stating the two twisted pairs from the servos go through a Female D9 Connector (SV-NET-SPL) into the back of any SV-D700 or SV-D1000 screen, but not into the ADAHARS unit?

I have recently bought and fitted these servos to my RV8, as I knew I wanted to go with Dynon for my panel, which I have yet to build. I have not bought any Dynon panel hardware (D100 or Skyview) while waiting to see how Skyview performs in the real world. As these servos have the 7 wires for...

Problem solved! While waiting for your reply I went back to the workshop, took everything apart, pushed back together the Dynon spade connections, remanufactured my connections, and it all got nice and hot. Thank you for your help, but it must have been a duff connection somewhere. All's well...

- Car battery voltage checked at 13.5 volts so I assume it is delivering sufficient current but I have not tested that specifically. - All wires to the Pitot were connected, including the two white sense wires. - I disconnected the battery and then circuit checked the red and black wires from...

I have wired the controller into my Dynon Pitot/AoA, in my RV8 wing, but testing with a 12v supply produced no heat. I disconnected the controller and placed a circuit tester across the Red power wire and Black ground wire, but there is no circuit there. Nor is there a circuit between the Red...