Search results

I've searched through paste posts about the wiring, but can't seem to find this. I'm using Tosten sticks where they say you need to use relays to operate the trim servos. I'm using Ray Allen trim servos, that use less than 1 amp for trim. When using the autopilot controller to run the trim...

The auto pilot now has speed sensitive settings, since version 16.0. What is unclear to me is where does Skyview get the speeds from? Is it in the aircraft speed range? Or somewhere else in the settings. Are the stall speed and VNE settings in the aircraft used as these high and low speed...

Looking to buy an AP74. Anyone with one for sale give me a call, 516 three one three-8 one one 9

I used to fly with my SV1000 and foreflight and foreflight always recognized my plane. Meaning that when I went into the logbook after a flight the current log knew It was in my plane I had just flown, my N number. I would just approve the flight and all was well. Lately after a flight that I...

My friend and I were having difficulties with his dual HDX panel and the 2020 antenna. He was getting POS source 1 fail. Today we got Dynon tech support to give us a call while at the airport and Jeff of tech support, and I, went through the setup. All settings were correct. Then I asked if...

I helped my friend set up his HDX and we got the trim motors tied to the autopilot button control, with sensors tied to the EMS. Everything works right according to me, but he thinks the elevator trim indicator is the wrong way. So the motor and trim move correctly bit the indication on the...

Yesterday I flew and the events were slightly different. I started up and turned on the Skyview screens. I then went to the iPad and it saw the Skyview network, tried to connect and the dreaded “Incorrect Password”. Slightly different than what has been happening. Usually it doesn’t see the...

The WiFi issues appear to be consistent now that I have been watching it closely. I always wait to get the Skyview screens up and running before I turn on foreflight on the iPad. Once the screens are up and running I check that the iPad is connected in WiFi setup on the iPad. Sometimes it is...

Still the same problem with WIFI. I have two 10" screens. wifi dongle in both. I continue to get incorrect password when I try to connect. I tried changing the password at the suggestion of Dynon support and it worked for one flight. Then right back to incorrect password. I think it has to do...

I've got a dual Skyview system in my RV6. I have a 430W and ARINC, also a Nav2000 all connected to the Skyview. After an update a couple of updates ago I can no longer get a bearing displayed on the Skyview from the 430W. I used to set bearing1 to the 430W and have it tuned to a local VOR. Then...

I sent my transponder in for repairs and it took kind of long so Dynon is sending me out a replacement SV XPNDR-261. Thank you Dynon. My question is, when I connect the new transponder up to my system, do I need to go into setup and configure the transponder or will my original settings work...

I recently added a second Skyview screen and today I tried updating my system from 15.3.4 to 15.3.5. I read through the installation manual and it states you must update each screen separately. So with both screens running I updated the first one. It went quick and didn't seem correct. Too fast...

I recently added a second screen to my setup. I always wanted two screens and had my panel setup for it. I love the way it works and all the landscape available. I’ve been keeping the left screen on half PFD and half Map. On the right side I have 20% EMS and 80% map. I also have Seattle Avionics...

I have a Skyview 10" display and having been flying with it. A friend decided to upgrade to the HDX. I bought his 10" touch. My plane is setup for the second screen I just never did it. So his display was installed in his plane and working. What is the procedure to set his display up to work...

I’ve got a SV1000 system in my plane, and an Arinc 429 between the Garmin 430W and the Skyview. The system works great. One point I’m seeming to have trouble with, is that when I choose a bearing on the skyview, and select the 430 I don’t get a signal. I could swear I was able to do it before...

I've been flying for a few years with the 430W & Skyview combo. Recently I'm getting a problem with selecting a VOR on the 430. I can't get any indication on the skyview's HSI. GPS works perfectly and strangely if I select an ILS approach I get all indications perfectly. With a VOR it's like the...

I added a heated pitot to my RV-6. I also ran the indicator wire to my EMS pin 10 as contact. I went in and added the sensor as a contact and put the contact indicator on the engine page. I can't seem to get it to work. I went in to the EMS setup page and I can see the contact is working. When I...

I think this is normal, but I can’t figure out why. I’ve done it a few times and it puzzles me. On an IFR departure I set everything up before takeoff. Set radios, alt bug and course bug. Then I set the autopilot to heading and 800 ft per min up but the autopilot not engaged. This way on takeoff...

I was able to setup my map / vertical speed required and other things required for VNAV to a runway. I am able to get the NAV and VNAV course displayed and also have the auto pilot follow it down to the set altitude above the runway. One thing I can't figure out, is how to have a flight plan...

I have a SV1000, dual radios, an iPad and a phone connection all into an audio panel. Almost always after I take off and climbing out I hear a musical tone in my headset. I never knew where it was coming from. I’m using ForeFlight and do get voice from that, approaching a runway, for example...