Search results

  1. F

    EGT & CHT probe failures

    I realize they are not that expensive but the trouble shooting and replacement is ,not to mention canceling flights when the warning shows up
  2. F

    EGT & CHT probe failures

    I have had the same problem. When i told them about it they said there was no issue with them?
  3. F

    Intermittent erratic fuel pressure indications - Kavlico sensor?

    Check your fuel filters are clean I also removed the sensor and found a fine film on the screen but you can only rinse it and wipe it no air pressure. New Fuel filter seemed to correct it.
  4. F

    Dynon hdx to a HUD.

    Did you have any luck with this?
  5. F

    Chasing altitude

    Calm day , 912 uls with grond adj. prop. . It gets off the selected alt then over corrects then tries to correct and over corrects in the other direction . This repeats over and over. I will check the servo shear pins next. It seems like the auto pilot setting are always changing on mine
  6. F

    Chasing altitude

    It is a factory built 2010 Kitfox. I don't remember the hole setting. The servos are what ever DYnon uses. software is current
  7. F

    Chasing altitude

    Yes I have done it a few times
  8. F

    Chasing altitude

    I have a skyview system and when in level cruise it chases the chosen altitude on AP . what is the correction for this?
  9. F

    RF noise

    Did you ever get this figured out. My d1000 is doing the same thing . I turn the skyview off and the garmin radio works fine.
  10. F

    My aircraft continually shows up as adsb traffic

    Is it automatic or do I have to change something?
  11. F

    My aircraft continually shows up as adsb traffic

    This one is on from take off to landing normally. The dangerous part is the traffic sign covers slip indicator ball.
  12. F

    My aircraft continually shows up as adsb traffic

    This is a d1000 skyview new install in a Remos. I did have this problem in my Kitfox after installing the ADSB in but it went away on it's own. Has anyone else had this problem and solved it.
  13. F

    ADAHRS cross check errors?

    Mine was doing that . I was updating one d1000 with a complete update instead of obstructions only. Dynon said if I did that I would need to do it on both units. Moral of the story don't do the full update unless it needs it.
  14. F

    New Feature Suggestion...PLEASE

    It seems like in 5 years they could have made this improvement?
  15. F

    New Feature Suggestion...PLEASE

    It would be nice to have AGL on the display? Advanced has it
  16. F

    EMS sfg file mismatch

    My obstacles need to be updated anyway so can I just do the full update on both then we know everything is up to date?
  17. F

    EMS sfg file mismatch

    Ok I get that part but why did it all of a sudden show up ? The only thing different we did on a rotax is unhook the exhaust sensors temporarily with the master offer then hook them back up prior to powering it? Both sides are reading fine. I also get a adshrs miss match in flight once in a...
  18. F

    EMS sfg file mismatch

    Can you recend that link? It will not open
Top