Search results

Please look at the attachment and the second "Caution Note" for the installation of the Slick Start magneto booster. If I read this correctly I can't install the SlickStart since I have the rpm pick up off of both of my impulse mag P-leads Any thoughts?? Thankx

Would it be possible to write software to change the "location" of the gyro-stabilized magnetic compass to superimpose a "vertical 360 degree compass card " around the otside of the ADI thus allowing a better heading visual and use the top spaces created from the removal of the "horizontal...

Are u saying that when u start your engine your D180 stays powered up all the time when the starter is cranking ?

Here's the engine start sequence...1)split master switch-Batt on. 2) Avionics switch on(boots up Dynon DEK180 only) 3) Engine start switch... to start. Here's what happens...power to D180 is shut-off(blank screen) and D180 reboots when ignition switch is released Is this normal or is something...

I did not wire or install my DEK-180 in my RV-8. When building the RV we ordered the Dynon Harness and an internal battery. I have read and use the Installation and Operating manuals frequently to solve most problems. Two issues that I can not resolve are: 1) How do I verify the state of the...

How accurate is the slip/skid ball representation on my Flight DEK D-180 ? The reason I ask is that my RV-8 flys very nice at 1/2 ball out of center to the right, when I apply slight right rudder to center the ball the airplane can no longer be flown hands-off, ie, I need to apply constant...

I have the DEK-D180. My Dynon fuel levels were not calibrated during the installation. My tanks are full of gas. DO I really need to empty the tanks to start the calibration procedure or is there an alternate way to calibrate the levels and have them displayed. My fuel flow is reading very...

What is the best method to clean dust and particles off the display of my DEK-D180? Thankx ZMAN

How do I connect my Lowrance 1000 handheld GPS to my Flight DEK D-180 ?? I thought the latest istallation doc was to include procedure.