Ammeter reads backwards

[AlanR]

Hi,
Skyviews x2
I am doing initial flights and checking SV parameters etc and my ammeter readings appear to be backwards. i.e. On the ground engine not running with both Skyviews turned on it will read +4.5amps I would have expected it to read -4.5amps.
Is it just a case of me needing to swap the EMS feed wires over on the shunt? EMS is difficult to access. I have tried playing with the parameters in EMS settings without sucess.

Thanks,

Alan

 

[Dynon]

Yep. You can do it at the shunt or at the EMS. Just flip the two signal wires.