Mark_Dickens
Member
- Joined
- May 20, 2012
- Messages
- 86
My Ray Allen pitch trim servo is wired into my VPX, along with the position sensor. I've ordered a AP-PANEL and intend to use auto-trim so I'll have to pull some wire out of the VPX and connect it to the AP-PANEL. I know I have to move the servo power wires to the AP-PANEL, but I'd like to keep the position sensor wiring connected to the VPX because how I have all the wiring routed. My question is whether this will work. In other words, does the position sensor affect operation of the auto-trim function?