Bo_Hannington
New Member
- Joined
- Nov 1, 2006
- Messages
- 20
I have a Rotax 912ULS in my Foxbat aircraft, and since I wanted to use all 3 GP inputs on my D180, I have replaced the 2 resistive Rotax CHT sensors with J type thermocouples.
I have used one of these Rotax CHT sensors as a coolant temperature sensor.
My installation manual lists 4 types of sensor to choose from, including the Rotax 801-10-1 sensor as type 4.
However, when I try to select this sensor type, I only have choices 1,2, and 3, but not 4. Using type 1 the Coolant temp is reading about 90 degC instead of 24degC ambient.
How can I get the right sensor type?
I have used one of these Rotax CHT sensors as a coolant temperature sensor.
My installation manual lists 4 types of sensor to choose from, including the Rotax 801-10-1 sensor as type 4.
However, when I try to select this sensor type, I only have choices 1,2, and 3, but not 4. Using type 1 the Coolant temp is reading about 90 degC instead of 24degC ambient.
How can I get the right sensor type?