D180 & Updater Can't see Servos

[GigG]

Neither my 180 or the updater SW can see the two AP Sevos. Only thing not connected is the Voice Audio Out from the AP74.

 

[dynonsupport]

What version is your D180 on? And are the servos both powered when you're trying? (they need to be)

 

[GigG]

5.1.1 .

And yes they are but it is hard to prove because you guys didn't include an LED on the servos.

I spoke with Dynon Tech support yesterday and am going to try to see if I can find any wiring issue.