I know there is alot going on with the Beta testing but I wanted to see if there would be any interest in this.
How bout splitting the screen (EFIS/EMS) with the EFIS at the top (3/4 Mode) and the EMS at the bottom (1/4). This way you could see our Engine instruments in a left to right scan, Tanks, EGT/CHT, Fuel lvl, Fuel PSI, Oil temp,Oil PSI, then Volts and Amps. Next to that on the far Right would be the Man pressure and RPM. Then maybe use one of the middle buttons for a Hot key to get in this configuration quickly. And of course we would have the ability to move probes in and out of this configuration.
Richard
How bout splitting the screen (EFIS/EMS) with the EFIS at the top (3/4 Mode) and the EMS at the bottom (1/4). This way you could see our Engine instruments in a left to right scan, Tanks, EGT/CHT, Fuel lvl, Fuel PSI, Oil temp,Oil PSI, then Volts and Amps. Next to that on the far Right would be the Man pressure and RPM. Then maybe use one of the middle buttons for a Hot key to get in this configuration quickly. And of course we would have the ability to move probes in and out of this configuration.
Richard