EMS Display image reversed

Y

yak55

New Member
Joined
Jun 14, 2006
Messages
8
Has anyone experienced their EMS have the display power up with a reversed image as if you looking at it in the mirror?
I had my D100 and D120 displays upgraded to the brighter displays and upon reinstallation I have had my EMS display power up with a reverse image. I would then need to power down the display and power backup and it would then show normal. This has occurred 3 times and all were correctable by power cycling the display. Any assistance would be greatly appreciated..
 
D

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
That is strange indeed. Is it reversed horizontally or vertically? Also, is the problem repeatable somewhat reliably. If you could, snap a picture of the unit in this condition and send it to support@dynonavionics

Note that this does sounds like a problem that will likely require the unit to come back here for a look.
 
You must log in or register to reply here.
Top