When I retrieve logged data from my D180 using the Dynon Support Program, the .csv file only contains EMS data, no flight/EFIS data. I get this with the 9-pin d-sub connector that is a part of the 25 pin EFIS connector.
Curiously enough, the 9-pin d-sub that comes from the 37 pin EMS connector is not recognized by the same ports that easily read the EFIS conenctor. The harnesses were Dynon supplied.
Q#1: How can I extract the logged EFIS data?
Q#2: Any thoughts why the EMS connector is not recognized? Is it possibly inactive on a D180 since there is already an EFIS connector?
Thanks,
DaveG
Curiously enough, the 9-pin d-sub that comes from the 37 pin EMS connector is not recognized by the same ports that easily read the EFIS conenctor. The harnesses were Dynon supplied.
Q#1: How can I extract the logged EFIS data?
Q#2: Any thoughts why the EMS connector is not recognized? Is it possibly inactive on a D180 since there is already an EFIS connector?
Thanks,
DaveG