Fuel pressure display on  EMS D10

bicyclops

New Member
Joined
Jun 29, 2005
Messages
18
Howdy,
On the EMS D10 (or the 1/3 screen display on the FlightDek) it would be very nice to see fuel pressure. When I'm taking off in particular, I look for oil pressure and fuel pressure and I don't have time to be scrolling around on the takeoff roll. It is also reassuring in flight to be able to see the fuel pressure at a glance.

Can fuel pressure be displayed in place of the carb temp or OAT bar on the EMS D10?

Can it be displayed or toggled in place of the GPH on the 1/3 screen display on the D180?

Pax,

Ed Holyoke
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
Ed,
Fuel pressure is an "info item" and can be set up to display in the 4 bars that are on the right of the screen on the D10. You can put trim indicators over there, MPG, and a whole host of other things.

Unfortunatley, there's no space on the D180 1/3 screen to show this, so you'll need to move to a different page. Of course you still have alarms for this value if it goes beyond your limits.
 
Top