How to recover from improper pitot static test

sstearns2

Member
Joined
Jul 2, 2007
Messages
56
Location
Camarillo, CA
I have always had problems with the attitude information on my D-100 and D-180. For example I typically get 5 degrees of precess during takeoff.

I had a pitot static check done without shutting off the units between check point altitudes and airspeeds as described in the 'white paper'. It makes sense how this would mess up the filters in the software.

My question is how to recover from this? Is there a way to reset the filters?

I have been flying for about 130 hours and the attitude performance has not changed from what I can tell.

Cheers,
Scott
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
Simply flying should in most cases case the unit to sort itself out after a few hours of flying. If it doesn't, though, and especially if you see a non-centered turn rate while flying without turning, give our tech support a call at 425-402-0433.
 
Top