OAT not detected across DSAB

[petehowell]

Hello,

I got the D10A installed and can see the EFIS screens on the EMS and vice versa.   DSAB and serial connection. 

I have a 2 wire OAT probe connected to the EMS that gives me a good reading on the EMS, but it does not seem to show up on the EFIS.   I changed the OAT setting from "N" to 1 and 2 with no luck.  Any thoughts?

Thanks again,

Pete

 

[dynonsupport]

Once you have the OAT definitely working on the EMS, you should have the EFIS OAT set to "N".

Both units' firmware need to be the latest version too, and DSAB needs to be connected as you've done. Are you able to bring up the EMS screen on your EFIS? If so, the OAT should be making it over. If not, there's something up with the connection.

 

[petehowell]

HGuys,

I'll set the OAT back to "N" and update the software on both units. I do have all the screens available on either unit, so I think the DSAB is working.

Thanks,

Pete

 

[petehowell]

OK - with the OAT set to "N" Everything works. First flight today - Winds aloft - very cool stuff.

Thanks for your help.

Ppete