Having trouble getting Rotax 912iS data on the Dynon HDX, they're just not talking. I'd love to see photos of how people have connected the Dynon CAN lines (blue and green) to the Rotax HIC A and B connectors. Any real photos of real working installs?
Photos of Rotax >> Dynon CAN wiring?
- Thread starter jefish
- Start date
RV12iS or something else?
Van publishes a wiring diagram for the RV12iS with both the Dynon and Garmin packages. If it isn't a RV, then their diagram might give you and idea where to start, but Vans uses a HIC module to interface between the Rotax ECU and the avionics. Just know the Vans HIC module is much more than just a connector between the two.
Van publishes a wiring diagram for the RV12iS with both the Dynon and Garmin packages. If it isn't a RV, then their diagram might give you and idea where to start, but Vans uses a HIC module to interface between the Rotax ECU and the avionics. Just know the Vans HIC module is much more than just a connector between the two.
The harness supplied with the EMS-221 was mis-wired, the green and blue wires were in the wrong holes. I moved the pins to the correct holes and it now works.
See https://www.rotax-owner.com/en/912i...otos-of-rotax-dynon-can-wiring?start=5#p34089 for more info.
See https://www.rotax-owner.com/en/912i...otos-of-rotax-dynon-can-wiring?start=5#p34089 for more info.