Radio Interference From D-10

[ksouthar]

Have recently began experiencing radio interference. The com radio is an Icom. After weeks of testing and trial the source appears to be a Dynon D10. Lots of static on the radio where the RX lamp is on. Can't squelch it out. As soon as I turn the D10 off, noise goes away and all is well.

The #2 Dynon is not affected or the HS34 module.

Thoughts or ideas before I haul it over to the avionics shop?

Keith
N355rv

 

[dynonsupport]

Have recently began experiencing radio interference.  The com radio is an Icom. After weeks of testing and trial the source appears to be a Dynon D10.  Lots of static on the radio where the RX lamp is on. Can't squelch it out. As soon as I turn the D10 off, noise goes away and all is well.

The #2 Dynon is not affected or the HS34 module.

Thoughts or ideas before I haul it over to the avionics shop?

Keith
N355rv

Keith:
We haven't heard many complaints about an EMS-D10 (it IS an EMS-D10, correct?) causing radio interference.

We may need to take a look at it back at the factory. Please contact Dynon Tech Support to work through this issue - email support@dynonavionics.com or call 425-402-0433. We have two full-time tech support folks available to work with you.