Re: Rotax 914 engine.

Butt

New Member
Joined
Dec 29, 2005
Messages
16
Hi Dynon,
just wanted to know whether you have any plans to also support the rotax 914 engine in future? It seems your EMS has only provision for the lycoming and continental engines.I know you supported the basic rotax 912 since have developed a harness for it, but how about the 914? Please advice.

regards
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
We fully support the 912 today. We even have a special mode for it that does all the Rotax required RPM vs. Oil Temp ranges.

The 914 has two unique issues: It uses differential fuel pressure, and there's no sender that is compatible with our EMS to read this pressure. We'll support the differential senders in the next generation.

The other issue is EGT probes, since the 914 comes with bungs pre-welded into the exhaust for EGT. We don't sell probes that will go into these mounts, but we can use any K-type EGT probe.
 
Top