TruTrak, 496, and Dynon

[khorourke]

I have an EFIS D100, EFIS D10A, EMS D10 and an HS-34. All this equipment is working together well. However, I am having some difficulty getting the GPSMAP 496 to talk to the EFIS HSI while also working with my TruTrak Digiflight II. There is conflicting setup information for the GPS. Dynon says to setup the 496 to use NMEA at 9600 with Advanced set to normal. TruTrak says to setup the 496 to use NMEA at 4800 with Advanced set to Fast. Does anyone have these three systems working together? I would appreciate some help in their setup.

Thanks , Kevin

 

[mcook]

Use 9600 and normal. You can set the TruTrak to accept a 9600-baud serial input through the setup menu.

I've been using this combo for a couple of years now and it works great.