Unable to access "Sensors" menu on D-100

Tcheairs

New Member
Joined
Feb 19, 2021
Messages
16
Can't get to the setup screen on the D-100 to reset my warnings thresholds.
The Setup menu item is "Sensors" but when I go to Menu (2 button) then>More (5 button) and page through More I get NO "Setup" menu which should get me to the "Sensors" menu..

the D-100 is my primary EMS and is DSAB with my D-180 which i use for EFIS. Tried to get to "Sensors" through the D-180 but no joy there also.. If the EMS Setup functions can be managed through the D-180 I'd really appreciate a step by step tutorial..Thanks in advance

PLEASE HELP..DYNON SUPPORT
 

Dynon

Dynon Staff
Staff member
Joined
Jan 14, 2013
Messages
14,217
Location
Woodinville, WA
The engine sensor setup can only be accessed through through the EMS side of the D180. Do get there, go to a page that shows the EMS on the D180 itself. Then press any of the buttons under the EMS page to bring up the EMS setup menu (but not the outside buttons, which scroll the menu). From there, you should see it. If there's no SETUP menu there, your unit might have OEM aircraft manufacturer controls on it that prohibit some settings from being changed.
 
Top