Recent content by Basil

We have two SV-1000 (running 13.0.3.3233) fitted with two ADAHRS. The a/c has done around 10hrs with no issues. Last flight was about a month ago. During start-up both Screens showed ADAHRS failure (the big red cross). Checking the start-up screen log all is good except that the "Init Sensor...

Thanks Murray - one of the options I was considering, and your diagram certainly helps. Another option I am also considering is TCW Technologies "Integrated Backup Battery System"; my first impression is a well considered and cost effective solution.

I agree if you have two screens you can comply with the 90-min rule, but if you only have one screen fitted (which is not unusual) then you have a problem. Just by coincidence we have a Sportstar with one screen and there is another LSA also with one screen; and we are facing the same issue.

Yes would like to discuss. You can text me your mobile # (if you are fine with that) or call me on mine 0412925300.

Under Australian Regulation CAO 20.18: An aircraft  that is approved to operate at night and is equipped with an EFIS must be provided with a battery[ch8209]powered back-up in the case of a failure of the aircraft electrical system, for the purpose of enabling the pilot to divert to and use a...

Your response clarified a few things and led me to check the set-up for the SV-COM-C25 which had the Squelch set at "100". Result - no radio transmissions were being received when the radio was in normal "stand-by" mode. Set the level to "70" and now works perfectly i.e. no static when no...

Is this a new problem or a new airplane? New LSA aircraft On the ground or in flight? If on ground, are you in a hangar? On the ground; still completing registration process but outsid the hangar in the open. Does it do it with the radio off? Volume all the way down? Does not do it with the...

We have a two 10" screen set-up with the SV-Intercom-2S and COM Control Panel. The intercom operates fine between pilot and co-pilot with no static noise and on transmission the recipient hears the transmission as we hear the response with again no static. There is no static on listing to ATIS...