donramm's latest activity

Two possibilities - first, the tubing is not tight in the nylon fittings - you can easily check to see if the nuts are tight and that...

From my own experience, I had a problem with airspeed indication, the pitot hoses in my wings, long time 10 years standing and then wing...

+1 on changing to Push-to-Connect fittings, the o-ring seal is much better. I use Loctite 567 sealant on my threaded fittings on my...

I'm counting on the "Push-to-Connect" feature of the FLF-00007 elbows to take care of the tube to elbow seal. If the end that screws...

I assume Marc Zietlin was suggesting the use of sealant between ADAHRS and the metal end of the gizmo to which the tubes are attached...

I did hold the plunder on the syringe to avoid "creep" and the altimeter very quickly went back to field elevation. I'm going to check...

I pulled the plunger out slowly to get it up to 2000' (or so) and stopped -- did not remove the syringe from the static port -- and the...

I took my RV-12 in for transponder and pitot-static bi-annual check. I only fly VFR. The tech administering the test asked me if I...