Recent content by Drthomasd

Hi PorterJames, I will take it! Tom Delaney Drthomasd@charter.net

Unit has been sold. Thanks for looking.

Sale price lowered to $2250. Thanks for looking! Tom

10” Skyview Classic (non-touch) SN# 009222 53 operational hours No harness $2500 OBO

Thank you for the reply. I did fall into that trap during my first attempt but the second time I was transmitting with no change from “low”. So I am looking for a reason why. Thanks again.

The gain setting in the comm setup area of the HDX is set at 50 and “low” is seen also. While transmitting “test” and changing the gain setting from 0-100 the “low” notification does not change at all. I am wondering if I should be seeing a change and if not, why not. Thanks

Greetings, In the sensor setup page for my Rotax 915iS installation I see that the rpm tach and oil temperature sensors receive their input via the CAN. An additional item, “(Rotax fixed)”, is listed for these two sensors. What does this mean? Thanks

Trying to find a solution to get engine data from USB to Savyanalysis program using iPhone X or iPad Pro C connector. No PC involved. Thanks

I would like to know if the C25 requires a network cable to each display or if only one network cable connects from the radio to the "master" display? Thanks,

Having difficulties with the installation of the Dynon level button. 12 volt power for the light completed and operational with the white wire of the button connected to pin 26 of the D1000. The org/black wire of the button is connected to pin 28 of the D1000 display however pressing the...

I am considering the installation of a standalone "level" button in my RV12. Must the autopilot be in expert mode to use the level button? Must the autopilot already be engaged prior to engaging the level button? Thanks,

Thanks for considering adding this feature. I would love it.

Thanks, the update will fix my problem! Tom

I am trying to make the vertical CHT widgets similar to the EGT widget. Is that possible? No luck with the "size" button. Thanks