GreggCuoco's latest activity

My guess is that if the radio died while you keyed the mike, the likely culprit is the antenna circuit, no matter what the VSWR is at...

What jnmeade said & further elaborating my post #8 - check the pins at the ends of the coax BNC fittings. The pointy end of the pins...

Not sure if the failure was on receive or transmit. While flying we just discovered we had no radio. I’m waiting for an answer from...

Hi Gregg - you can DM me if you like. Given the number of 760 units ‘out there’, & possibly no similar reports, I figure 3 in a row for...

Hey Jake, Thank you for the reply. Yesterday I disconnected the radio, the comm head and the intercom. I pulled out the prints and...

Already preformed an SWR at the transceiver, Coax and antenna were under 2 I’m at the hanger right now shooting wires. So far all checks...

Third transceiver failed within 15 minutes. It's time to look at my plane. I'll keep you posted.

Good advise, thank you. If this third transceiver goes south I'll get into print with DYNON tech support (they are great) and see what I...

In 48 years working avionics, I'd say at least a third of the wiring issues I've encountered after initial installation have been...

"My initial reaction to your post is that it is not likely the radio, but rather some other electrical issue" I have been racking my...

Hey guys, I have a new Zenith Super Duty with the Dynon SkyView. I have the 760 transceiver, 10 total hours on the plane and SkyView...