Recent content by ibisaero

I had the chance to get a better look at the system today due to a maintenance. I can hear sounds from both D1000's . The wiring is ok. The pilot confirmed that even in flight when a yellow TRAFFIC text is displayed he didn't hear the audio warning.

Yes I hear other audio warnings as well as the boot " Dynon Skyview " sound .

I've just updated my 2 D1000 to 6.0 and solved the traffic problem with ZAON PCAS but now I see that the traffic icon sais "ZAON PARTIAL" ( what does that mean? ). Made a few tests and I notice the while the visual TRAFFIC warning was on screen I didn't hear the audio warning. I went to audio...

That solved the problem! Thanks!

After I updated the skyview to the latest firmware I followed instruction for updating the transponder firmware . Once finished the transponder update instad of transponder status there were PWR CICLE or something like that. After about 10 minutes nothing changed and I restarted the Skyview...

Hello! I was wondering if there is more precise information for the SV-EMS-221 roll out. We are building one of the first aiplanes equipped with Rotax 912is and Skyview and have everything ready for starting the engine. The only thing we need for flying the airplane is the SV-EMS-221 . If it's...

As you might know Rotax has released the new injection version for the 100Hp engine.They say that all parametters for this engine is availble in some " CAN AEROSPACE protocol ".They also sell with the engine some instuments cappable to read and display this CANBUS.I want to buy this new engine...

Hello! I have a dual Skyview pannel.I allready purchased the MAP certificate and activate it so now I wanted to buy the Nav data from jeppesen but I saw this Pocket FMS data for Skyview. If I buy this 119 €, 1 year subscription you mean is all I need for having Nav data in my Skyview? :o

I have the same problem but with both screens!Randomly for one seccond or two the sensors come to life and after the red crosses show on the EMS .

I have this kind of problem after upgrading to 3.2 . When I go to fly the first time after upgrading and turn on the Skyview I noticed that the pitch servo is partially engaged when the autopilot disengaged. When I turn OFF the servo power the problem disappear. After this I shut down the engine...

I must install the GTN650 from GARMIN with 2  D1000. Looking at the installation manual for GTN650 I see that the pin for GNS430  are not the same and don't even have the same name. Do you have any GTN650 to SV-ARINC-429 connections ?

Re: AmeriKing ACK-451 406 Mhz ELT  GPS position RS It is made by AMERI-KING CORP. in USA and the model is AK-451-21.

Re: AmeriKing ACK-451 406 Mhz ELT  GPS position RS This ELT accept only aviation RS-232 input!

I read the manual and says that The skyview is equipped with 5 RS-232 serial ports. I want to install an ELT 406Mhz with GPS position. What i need is Aviation RS-323 format Baud Rate (fixed) : 9600 , Parity : None , Data Bits : 8 , Stop Bits : 1 . I allready go to Setup menu for the serial...

Hello I have the same problem with my D1000 when I connect the backup battery i can see the backlight on and the screen black , I see the fans keep spinning (unlike the normal startup without the battery connected) after that nothing happens. I try your method of pushing sumultaneously 1/2/5...