jakej's latest activity

A recal is absolutely not needed 😉

and the static ports ? What I’m trying to establish is the chance that water/ condensation may have entered the ADAHRS in any way? Have...

Skippy - beare with me on this, High or Low wing? Where is the ADAHRS mounted? PM me if you wish.

Not polarity sensitive - I‘d recheck or redo the connection.

First easy thing I‘d do is connect tubing to the outflow side of the cube & have it go to a container. turn the electric pump ON & after...

Yes 😉

Problem with testing is that the 'warning' message will only come on when it actually is stuck on & the VPX sees more than 500 rpm - you...

If you connect the wire, with supplied resistor in line, from the starter motor side of the solenoid direct to VPX J2 pin 11 it will...

Read post #5 - you are missing something. It will not show a line fully across the display when on glideslope ?

Nope - done many installs. Hope it works out ok for you 😉

Me too, Following

I know I'm late to the party & I could be wrong - Isn't the power to the fuel flow cube a regulated 12V- not 5 volt? I've never...