jakej's latest activity

Time for a reset - Are you still using the home made Pitot/AOA ? IMO, & I’ve done many installs, the issue is with your installation...

Rhino - correct, depending on what equipmentsoftware Jayp has. IF the servos are going back for SB-001 then I’d suggest he has the...

I’m on vacation however I‘ll pm you later today - just need to know if you’ve done the Servo neutral cal & checked that there is no slop...

The A/pilot CABLE IS DIFFERENT to the standard network cable for a reason. The network wires ie pins 1&6 + 4&8 are the network wires...

Brilliant idea Paul - I don’t know why a few of us didn’t suggest that. Then again not knowing/seeing the install details is one of the...

I think I've written this before but, just in case....... My autopilot worked perfectly for over a year and then I started to get...

I’d update to version 5.6 (last one ever) & see how you go, worth a try however I’d check with support@dynonavionics.com first.

Jaba- you can go down that path again, i have done that several times. I use a PM1200 & the AMX 2/10A ( Maker Plane) with a 3PDT switch...

As S Watson said - it’ll be the 5volt wire or ground - that’s the only common thing to both & it’s more localised as the fuel pressure...

Peter, all important ,essential, critically equipment should be on independent circuit breakers or fuses. Doubling up those items can...

Gotta ask - why did you parallel the power to 1 x C/B ? That's not the way to do it, you need independent power to each servo so that IF...

Thank you for being humble enough to say that.😉

Charly - I’d just connect 1of them temporarily to find out & also use a heat gun to confirm ops, applies to the EGT & CHT.

I'll call you a bit later this morning ;)