RVDan's latest activity

When Skyview powers Up, it will be at the base menu with PFD displayed on the leftmost key. The leftmost key (#1)should read PFD. Select...

Typically AC23.1311C and GAMA pub 12. There are some SAE specs listed in the AC also

You can only navigate to the current flight plan, which you uploaded to Skyview so you have to have Skyview selected for the HSI. If you...

On the PFD select the HSI source to Skyview. It sounds like you have the 796 selected

While not familiar with this implementation for Skyview, but noticed that Vfe and Vne changed between the OP images. What’s up with...

You can setup low airspeed aural warning in setup/airspeed. I have it enabled on my airplane.

I don’t recall the details, but in setup of the EMS parameters you can set or disable the audible alerts for any parameter.

The really cool thing is that if you fly with another pilot who also has Foreflight in the airplane, you can share flight plans across...

Maybe somewhere in setup, but don’t know where. Physically there will be a wire in the Ethernet plug (RJ-45) on the back of each...

It seems routine that Foreflight won’t connect properly, if started prior to the Skyview network being fully operational. If Foreflight...

If you have the Ethernet connection between the displays, you only need to update one with the Dynon supplied databases. The other unit...

Update- I haven’t had duplicate traffic or traffic alerts that were my own aircraft for more than 10 hrs of flying in the Washington DC...

For future reference, l-com.com has a selection of mountable ports.

Unfortunately not that I know of. It does on an iPad with ForeFlight or FlyQ. I did hear that you could pull up the taxi diagram by...

No airspeed indicated when this happened.