Search results

I have erratic compass readings on a Husky using the Dynon heated pitot tube and controller and garmin G5s. I have no metal tubings from the probe to the AHRS. But I have the GMU within 3 ft from the Probe. I need to check if I wound the wired up in a circle, which would be stupid. i LL POST...

Stabilized the long pitot tube that is mounted behind the wet wings section with a small brace strut. Fluctuations gone, Skyview pitch indicating normal. Ap still in tuning progress. :D

Did another testflight today. Airspeed fluctuates up to 5 kts and I believe it is connected to vibration of the long pitot tube , which is mounted behind the rear spar. Flucuation is immediatly resulting in pitch indication, without aircraft changing pitch. Flictuation is randome. Pitot tube is...

Recalibrated the Skyview and Servos. Flew with very good results. Needs a bit finetuning in pitch axis. What I noticed in calm air with the plane stedy, that the Synthetic vision has pitch changes without the AC oitching. The Turbine has no vibrations and the AAHRS is fixed and can not move...

Of course I used the guide mentioned. but it says after pressing the ALT TRK Button let it fly for a couple of min and then... It will only fly for 3 seconds. I ll go through the servo cal again and fly again tomorrow with default settings. Will keep you posted.# ;)

Hi, I just installed the Skyview in my Turbine Impulse called Pocket Rocket. Pitch and Rollservo with no play. Flying it manually requires small stickmovements especially in pitch and when above 200 KTS. On the first flight with default settings I engaged the AP acc to the manual in Simple mode...