Search results

you can pay for the data once and although it's subscription, the radio data will stay in the SkyView forever - FRQs doesn't change often for airports so basically you get the FRQs data for one subscription fee :)

So I got a response from EasyVFR 4 team: Hi David, I'm sorry for the troubles you are experiencing. This is a known issue, and we are working on a solution together with Dynon. We are depending on them unfortunately, but I know it is on their todo list anyway. Kind regards rob

Hi, I loaded my SkyView with PocketFMS data for Europe (based in CZ) and it also includes all airfield frequencies that I can tune using the TUNE FRQ button - that's nice - the problem is when I load an airport into the COM, the four buttons - TWR, ATIS, GND and ATC do nothing - because the...

Don't you know if it is possible to send radio frq from skydemon to Dynon Skyview?

So I did and unfortunately this is the answer: I don't know of a way to display two elevator trims. The name has to be specifically ELEV or AILERN for the system to recognize it as a trim position input and give you the ability to calibrate it as such. We don't even have the ability to show...

Ok, I managed to to add another option "ELEV2" - the problem is, when I want to display it, only two styles are available - analog value (between 0 and 5) or FLAPS-like widget (quarter-gauge and needle) but no other styles - so no elevator trim widget (bar with two arrows on each side) is...

that’s exactly what I also found but honestly after trying it - I have no idea how to achieve that. See attached pictures - I don’t have any possibility to create my own sensor input - only use already existing ones and ELEV can be used only once - no chance to add it in “a custom way” :/ Not...

Hi Mike, It’s an official kit - Savannah SR from I.C.P - basically modified zenith 701. It uses two separate trim tabs on aa elevator and therefore two servos. The POH says you should do a full trim cycle before every flight to make sure they are synchronized. I want to monitor both these...

I have two elevator trim servos and I would like to see their position on the HDX display, but it seems I cannot setup it this way (only one trim servo is possible to confirm) - is there any solution/workaround?

Hi, I have Rotax 912iS installed and when I press and hold the Start Power Switch, then Start Switch and if I let go the Start Power Switch in first 10-15 seconds after the start, I get CAN Fault message, both Rotax warning lights (line A and B) are solid and all avionics is running on battery...