Search results

  1. C

    Balance Ball backgroud

    Ball during AOA calibration One problem I've had is while calibrating the AOA you lose the ball. You are doing stalls while calibrating the AOA, so this is a time you really need it. I'm sure it's hard to have it move to another part of the screen, but maybe you can move the counter to one of...
  2. C

    Vertical Speed tape instead of a number

    How about instead of an anolag display, use the three lines of text that are already used in that area. Have the number toggle between the upper and lower position depending on climbing or desending. Something like this: +500 VSI VSI -500
  3. C

    Using the original Van's pitot location

    Kelly The Gretz mount goes against one of the ribs and the spar, so it will be an inch or two away from the Van's location.  Sounds like you already drilled the hole for the pitot, so did I.  I just used that hole for my Grand Rapids OAT probe.  Also you could use it for your Dynon OAT if you...
  4. C

    Dynon TAS vs GPS TAS

    I've been trying to check my pitot-static system on my RV.  I have a Dynon heated pitot tube in the Vans location.  The Dynon OAT is under the HS (it's checks out good with two other temp gauges).  There is a Vans ASI on the same pitot-static system as the Dynon.  I've been using a GPS and...
Top