Search results

I searched for this subject, but did not find anything.  Is there any external information available that can be used to provide autotrim capability?  Is the trim UP/DN display on the D100 derived within the D100 or is this derived within the servo?  Is the trim available on the Dynon digital...

I am using GP1 as Tank #3 and do not want a low level alarm. I do however want low level alarms for tank #1 & #2. How do I configure my D180? It seems that all fuel tank alarms are set in one place. fyi, I am using the GP1 for my oil tank level on my Radial Kitfox and the engine normally...

I was planning to use the Fuel Tank 3 as the indicator. If my probe output is 0-5VDC, do I need to add a load resistor for this?

I have a capacitance probe that I am using for Oil Quantity on my Rotec Radial Kitfox. Can I connect the probe output (0-5VDC) to the GP3 Input rather than using a resistive probe? What would the probe type setting be?

My Rotec Radial 2800 uses an electronic ignition to control the low side of a transformer primary side; the secondary is for the spark plug current through a distributor. The high side of the transformer primary is 12VDC. Can I use the low side control for the Tach input to the D180? I will...