Search results

Waas, yes. Now that you mention it, I'm not sure if GS shows up after the FAF. With the start up test, no GS indication is provided though. Do you have the link to the garmin settings so I can double check my set up?

Yes HS34 is installed and functioning. Also D100, AP74 and servos. All otherwise fully functional.

I don't get waas derived GS depiction on the HSI from my Garmin 420 (gps com-no vor). I thought I had the configuration correct per this forum, did I miss a setting? Other CDI, and AP functions work as expected.

My HS34 instalation is complete. What are the HSI configuration settings for the GNC420 (the GPS only version of the GNC430)?

I'm prepairing to install the HS34. Currently have the AP74. I'm I correctly understanding that I have to do a separate firmware update for the HS34, using the serial port wiring on the HS34 unit? Should I do the D100 update befor or after the HS34? Also, should the DSAB wires be attached in...

I did a quick post install flight yesterday. It was pretty bumpy and gusty, so I wasen't too concerned about doing the flight portion of the cal proccess. Just wanted to see the AP work, which it did inspite of the ham handed installer. Q is, what is an acceptable level of servo slip. I was...

Any ideas on trouble shooting D100 to Apollo SL70 xpndr communication via my Approach systems harness and Pro G Fast stack hub? I've already selected potocol 1 on D100, and selected 1200 bauds on the SL70. Still no alt indication on the SL70. Any way to verify my D100 is outputing a signal which...

Any problem with routing the wires from the remote compass in the same conduit as the shielded strobe leads? Assuming I maintain separation between the strobe power unit.