Search results

Sometimes when You are underway in a non familiar environment with limited access to facilities (internet for probe data etc.) and Your mind deeply focussed on a problem even obvious hints are helpful, so thanks for Your comment. I had to learn the hard way, but I solved my problem and I want to...

I have a Princeton capacitive probe installed which works with conventional Datcon indicators. I cannot exactly specify the probe type, its DOM should be 2003, it has 2 pots for full and empty; 3 connectors 12V, ground and send; socket is pentagonal. When I set it to type 1 output is some...

Re: 2 Rotax CHT with 2 additional temperature sens Thank You very much for this information. I will use the original Rotax sensors for CHT and display them as CHT1 and CHT2. I will keep my fingers crossed that I can cheat a bit ;) and display the additional thermocouple measurement of coolant...

Hello, in my standard Rotax 912 installation the 3 GP - Inputs of my D180 are used up for (original resistive) CHT and OAT. Can I configure the CHT - display in a manner that it shows me the 2 (resistive) CHT's and on the remaining two bars two temperatures, in this case coolant and carb...

Hi, i am installing a Flightdek D180 and want to use it for monitoring battery current according to scheme A. Battery is in the rear with the (unfused) fat wires (4AWG) about 12 feet long, giving sufficient resistance. I intend to save the shunt resistor and take the positive wire itself for...