Search results

  1. A

    Manifold Presure Issue

    Just wanted to provide an epilogue and thank everyone for their help. When I took the old sensor out it was indeed contaminated with something (as hypothesized by Dynon Support in reply #2), I think it is residue from the dye in the fuel. I replaced the sensor due to the above mentioned...
  2. A

    Manifold Presure Issue

    Thanks for the information. Where does this suggestion come from? The Dynon installation instructions don't say anything about where to mount the sensor. Thanks
  3. A

    Manifold Presure Issue

    No, actually it is mounted relatively low on the firewall, a good foot at least lower than the cylinder. Thanks
  4. A

    Manifold Presure Issue

    Thanks for the ideas. To make matters worse, it worked perfectly yesterday. I'll try cleaning out the line to the sensor and see if I can find anything. Thanks
  5. A

    Manifold Presure Issue

    I have searched and not seen this issue mentioned. I have a 10" Skyview in a Glasair Sportsman with an IO-375. For the last dozen or so flights I have had this issue, but it did not show up in earlier flights. On engine start the Manifold pressures reads pretty high, usually above 29". At...
Top