Search results

Hi there is no update from the database after power up the system or hand input the frequency from the Trig radio on the top line. If I push the station from Dynon to the Trig radio the database will read the station. Dynon skyview 1000 Trig TY 96 Daniel Van’s RV12

Hi Sins I have installed version 15.1 I have problem to start the Skyview on his backup battery. The picture is coming up, get dark then if you push button one the picture is come again. The problem is also if an USB stick is in. If I switch the master on the Skyview is starting normal, after...

Hi all I did the calibration in the last Fligth, because the wind showed over 90 knots. Then it showed the better value of 37 knots. In the next flight it turns 90deg off course. What happened to do that? Daniel flew in a Tarragon with dual Skyview 1000 touch/700

Hi Dynon If possible I would like to have a dynamic airspace 1000 ft above my actual position down to the ground. Because in Switzerland is the airspace very complex. Thanks Daniel RV12

Hi all How to select a second target in HSI like in pilots user guide figure 25. I have still both needle on the same position. If there a possibility to select the second to an airport or an virtual VOR to VOR. And give the distance to this point like HSI 1 Thanks Daniel RV12 traveleler

Hello all A friend asked my his skyvew speed indicator jump 20 to 30 kn on ligth thermik chanches on the backup speed it changes only a bit. If there a setting in the setup to get the speed changes lazy? All static and dynamic tests on ground are donne and good. Daniel, switzerland

Hello, yesterday i had a funny start up. I have an RV-12 all in no ads-b flarm inteed, radio with extra wire. External power 13.9 V on batterie. I powered up the start screen stand unusual long then i got a 'bang' vertical stripes colored, then the start sreen again one blue line normal and the...