Search results

Apparently the employees at Dynon no longer answer the phone. I have probably called 200 times to tech support and sales this morning and I never get through. I left messages at 8:00am on both lines and no one has called me back and it is 10:00am. I really need some help with some equipment...

I have had the Dynon 60 amp shunt break around the mounting holes twice in 330 hours. It is attached to the fire wall high on the right of my RV10. I was especially careful about mounting it the second time to make sure there was no extra pressure on it. This time I got a friend with an end mill...

I installed an Aithre C0 detector in my Skyview system. The Aithre was displaying substantial amounts of C0 through the Skyview, but 0 through the Bluetooth connection to my phone. It turned out I needed a software patch from Dynon to make it display properly. Dynon also has a widget for the...

I installed a Aithre CO detector. When I turned on the system the CO detector indicated 18-19 ppm. I called Aithre and they told me that I need an update to the EMS files. I wrote Dynon and they sent me a patch in less than an hour. The CO detector works fine now. As usual Dynon tech support was...

The Dynon yaw damper on my RV10 is a little weak to keep the ball centered in all normal pitch and airspeed combinations. I have a fixed trim tab and have adjusted it a few times, but I can’t get it to fly ball centered at both low speed in a climb and high speed in a descent because it does not...

I have a Skyview 3 screen setup in my RV10. I have a 10” screen on each side set up as PFD’s and a 7” screen in the middle for engine instruments. When I originally installed the ADAHARS I did what the Dynon manual said and used a splitter to join the the ADAHARS together and run one cable...

I am building an RV10 I have 2 HDX1100 screens (one in front of each pilot, my wife was a Pro pilot also) and a HXD800 in the middle for engine instruments. I also have a Vertical Power Pro for switching and circuit protection. The Pitch and Roll trims are wired through the Vertical Power Pro...