Search results

Why didn't circuit breakers pop out. ??? They are working fine

I want to know why it happened. Why didn't Circuit breakers pop out if there was some nasty surge ????

Thank you Dynon ! is it Robert from marketing department I am talking to ? :)

Thank you Dynon support. I have messaged u privately my contact. Our vendor through which we bought will be in contact shortly. We want it replaced as repairing it and then sending it back to Pakistan will waste precious time. We are looking to change our whole fleet with Sky view and we hope a...

what capacity circuit breaker should be installed with Sky view system. I install two 5A circuit breakers for two separate displays. Is it fine ? Please advice

at ground run the electrical technician accidently removed the power (while engine was in starting phase and alternator was not on) thne he quickly plugged back the power. was it due to power surge ??

and yes i unplugged the battery. One display is working and other is not (it powers on while battery connected for 5 to 10 seconds)

I connected the back up battery to second display.. its status was charging (around 10.5V) but on second display (faulty one) battery gets discharged on a very fast pace (display shuts down in 5 to 10 second) and it reads "Internal voltages fail 12V" What actually happened was during engine...

yes those are right. exactly right rather. (24V). I connected second display to the same plug it is working fine so the problem is with in display it self. wiring and plug all okay

I called ! nobody responded ! may be because of weekend. I need it urgent

The display turns on for some time now ... when you go into the hardware screen set up you see the internal battery is discharging fast and it displays "Internal Voltage fail 12V" HOWEVER BACKUP BATTERY RUNS FINE ON OTHER DISPLAY !

Dear concerned, we have installed your Sky view system on our aircraft. It flew fine for first two sorties. On third engine start up, one of the them displayed message of "Interval voltages Fail 12V" in local screen set up in hardware information. Now it does not gets tuned on. Power is being...