Search results

  1. I

    Alencoder choice for XPDR Becker 6401

    I try most of the 10 becker mode mode but does work I will check again the wiring
  2. I

    Alencoder choice for XPDR Becker 6401

    which message format 1 to 4 to choose on the EFIS function ALTENCOD to communicate with a transpondeur BECKER 6401 and how to setup the Becker 6401 to communicate with the Dynon (10 choice) thank you for your help
  3. I

    AP74 does not work in Nav mode

    the AP 74 connected to the D180 which is also connected to GPS AVMAP EKPIV does not work in NAV mode under the function GOTO of the GPS whereas the DYNON display correctly the route in the HSI mode, any solution?
  4. I

    D180 wiring

    "I'm not sure which original EGT probes you are referring to" : I realised that I was not very clear : We are in fact replacing a flydat (which were orignialy mounted) by a D180. THe original EGT are in fact Flydat's EGT you may be right, we are going to check the way this probes are wired.
  5. I

    EFIS WIRE HARNESS  COLOR CODE

    Thank you for the color coding, it is what we were looking for. Moreover, we have just received two more D100 and their harness and everything is OK : the wiring diagram are included.
  6. I

    D180 wiring

    We are wiring a D180 on CTSW equipped with Rotax 912. The wiring has been maid using dynon harness (for EFIS, Rotax 2 EGT, D37) but some probes are not working :  the EGT (whiwh are original rotax ones)  give a correct temperature as long as the engine does not work ( when it functions the...
  7. I

    EFIS WIRE HARNESS  COLOR CODE

    we have got exactly the same probleme with at least three EFIS harness : we do not have the wiring diagrams. (In fact in one of the harness, there was a paper from "stein air" but the colors of the wire do not correspond : for example , concerning the DB9, we have got four wires (red,black...
Top