Search results

HFMan, I did try pressing button 1 as soon as the master power is turned on, didn't work for me.

I have also started having trouble booting up my 7" Skyview Classic. It takes repeated power up and power down cycles to eventually boot up. I haven't tried disconnecting the backup battery yet. How did others resolve this problem? Was it necessary to return the unit to Dynon? Thanks

On my last flight I was getting intermittent high fuel pressure readings of 8 - 10 psig with the P4055-5025-1 Kavlico fuel pressure sender on a Rotax 912 ULS.  The engine continued to run smoothly.  Previously the fuel pressure had been solid at 5 - 6 psig.  Although I haven't checked...

In the User Log Data downloaded from Skyview, are the GPS ground track and wind direction true or magnetic? The heading is stated as magnetic. Trying to use this data for IAS checks.

With only one displayed power, I do hear the audio test from that display. For both displays, each one tested separately. Where else to look? Thanks.

Skyview audio pins 13 (left) and 31 (right) from both Skyview EFIS are connected together for mono audio and then connected to pin 32 (Aux 1 Audio In Hi) of the GTR200. Skyview audio pins 30 (Audio Ground) from both Skyview EFIS are connected together and connected to pin 31 (Aux 1 Audio In Lo)...

Thanks for the response. I hear the audio test on both screens. Any idea what else it might be?

I have Skyview configured to give audio alerts for Traffic and Switch Fuel Tanks. In the Audio Setup menu, the Volume Control/Test is set at 75% and I hear the test sound "Dynon Skyview" repeatedly, so the wiring seems ok. However, I do not get the audio alerts. I do not get an Audio...