Search results

  1. P

    Blinking Screen on D-100

    A comment today from another Dynon owner was to the effect that: if you start engine before the Dynon has completely booted up - there's a greater chance of any voltage spike, no matter how minor, upsetting the instrument. Possible??[i] He also suggested that it be connected up to the laptop...
  2. P

    Blinking Screen on D-100

    I have a 2009 year build D-100 in a new RV-9A, which has just done 12 hrs on test with approx 25 start cycles so far - since completion 4 weeks ago. The aircraft has always been in hangar, and our weather is benign - mins about 5-10 deg C, and max's 20-30 C. The D-100 is DSAB to a D-120 EMS...
  3. P

    DSAB enabling on older D100 + EMS-D120

    G'day Dynon, We have an RV-7 in the panel finishing stage, but I need to be sure that the D100 will talk to the EMS D120. These units were purchased from VANS before 10/4/2006 as the Installation guides show 'Revision B' The D100 is s/n 002526 The D120 is s/n 001666 Do we follow the...
  4. P

    OAT

    Have checked the EMS settings and the OAT is in GP 1 as you said. I have gone to the EFIS side and changed the OAT settings there to 'N'. There's no difference. The current OAT indicated by my thermometer is 14c and the Dynon OAT shows 14c as well.....so no diffs there. But, the DA on the...
  5. P

    OAT

    The unit that I have is #1552, and it's invoice #8689 of 6/19/2007 - so that means it's probably a '2' ?? Can't see a black band on it though. Yes, it is located on the LHS side of the EFIS split, and is accessed via the EFIS menu. I'll try it on setting 2 when I check the RV-9A this...
  6. P

    OAT

    I have a D-180 and need confirmation of how to change the instrument OAT reading to match my standard thermometer. ( Have read page 7-8 and it doesn't work for me) When I change the value in the highlighted box, what is then needed to make the instrument change it's temp reading??? thanks, Ralph
  7. P

    G296 to D-180 and TT Digiflite 2VS a/p

    Having probs getting the G296 to talk to the D180 and the A/P. Using the violet data out 2 line off the 296 into pin 19 of the EMS DB37 connector..... should this be going via pin 22 of the EFIS DB25 connector? Also, the 296 isn't talking to the A/P.........where it's into pin 17 of the DF2VS...
Top