skyview hdx

My Dynon Skyview HDX 10HD has now been flying about 8 hours since it was installed. Here in Germany I am running the Jepp database which has already been updated twice. During approximately every 2nd flight the system shuts down (black screen) and reboots ) Already send 5 diagnostic files to the...

When I press push to talk and transmit the side tone picks up my voice and white noise, that I think may be environmental. I’m wondering if turning down the microphone gain would help, but in the com setup, mic gain is greyed out and can’t be adjusted. When the motor isn’t running, the white...

hey all, finishing up a 1981 YAK 52 SkyView installation and I'm having issues with CHT6 & EGT 5 reading negative. I have tried swapping wires at the sensor side, i have swapped connections from EGT 5&EGT6 and it 'X' out on display, I have checked continuity from the k/j-type wires to the...

I thought I would share pictures of another installation of certified Dynon HDX with a blank AP control panel. I just picked up my mooney from Saint Aviation with a brand new panel. @jessesaint and his crew did awesome job pulling out old equipment and cutting a beautiful new panel with 10”...

Good morning everyone, I am having this problem with my SV HDX1100. The touchscreen stopped working in certain areas and also as you can see, the ADHARS is out of control, I don't know what it can be. I am from Ecuador and it would be very helpful if someone knows how I can solve this. (I know...

Currently I have a Skyview HDX and an Avidyne IFD440. I can get a GS when an ILS is active, but an LPV approach does not give a GP.

Hello, Currently working on a RV8, I have installed 2 Skyview HDX1100 at the front and a Skyview Classic at the back. All the configuration of the EMS, AHARS and transponder was done on the 2 front displays while the one at the back was off. After the configuration has been completed, I...