Actions to be taken following device configuration.

bernardsv

I love flying!
Joined
Jan 7, 2012
Messages
34
I recently received my Classic display back from Dynon for a minor repair. After installing it, I get the message that the following devices are not networked - 2nd EFIS Display, ARINC 429, 2 x ADAHRS, EMS. I wasn't expecting to re-configure anything following installation. Is there any further need to adjust settings on any of these devices after Configuring the network?
 

jakej

Well-Known Member
Joined
Oct 10, 2007
Messages
2,137
Location
Adelaide, Australia
re Configurating network is the first action I do when I re install devices, sometimes the software versions are different/newer to what what’s already there YMMV 😉 HTH.
 

RVDan

I love flying!
Joined
Aug 8, 2012
Messages
281
Location
Frederick, MD
I agree with jakej. First thing is to make sure both displays are same sw version. Then if still having a problem, you need to have Skyview search for network devices and make sure it finds everything. When they run the display on their bench, the devices on the network changes, so you need to bring the display back to your network.
 
Top