ADAHRS attaching hardware

grayfox

I love flying!
Joined
Jan 11, 2012
Messages
7
Location
Honolulu, HI
Don't know if this has been previously covered. Ref. Install. Guide Rev N sections "System Planning" and "ADAHRS Installation": Page 2-7 says stainless mounting hardware not recommended. Page 5-4 says use stainless or brass. Contradiction? I'm thinking 300-series stainless mach. screws and nuts should be OK, but not sure of MS numbers. Clarification please.
 

Dynon

Dynon Staff
Staff member
Joined
Jan 14, 2013
Messages
14,232
Location
Woodinville, WA
Interesting discrepancy. What we're really trying to say here is: if it sticks to a magnet, it's not ideal.
 

airguy

Well-Known Member
Joined
Nov 10, 2008
Messages
1,069
Location
Gods Country - west Texas
Interesting discrepancy. What we're really trying to say here is: if it sticks to a magnet, it's not ideal.

And once you've tested it with a magnet - if it stuck to it, it's not only not ideal, but it's REALLY undesirable now...   ;D
 

Dynon

Dynon Staff
Staff member
Joined
Jan 14, 2013
Messages
14,232
Location
Woodinville, WA
That's actually a great point. Ideally, you should test against an identical a piece of metal that isn't the actual screw that you're installing.
 
Top