Where have you folks mounted an ADAHRS unit in a RV 7 Thanks Smilin Jack
jethound Member Joined Aug 4, 2011 Messages 53 Aug 17, 2012 #1 Where have you folks mounted an ADAHRS unit in a RV 7 Thanks Smilin Jack
D dynonsupport Dynon Technical Support Staff member Joined Mar 23, 2005 Messages 13,226 Aug 17, 2012 #2 The most common location in an RV-7 is on a shelf built inside the upper fuselage, behind the baggage area. -Dynon Support
The most common location in an RV-7 is on a shelf built inside the upper fuselage, behind the baggage area. -Dynon Support
jethound Member Joined Aug 4, 2011 Messages 53 Aug 18, 2012 #3 That's what I did yesterday. Just ahead of the F707 bulkhead with the top aft skin off. Thanks Smilin Jack Code:
That's what I did yesterday. Just ahead of the F707 bulkhead with the top aft skin off. Thanks Smilin Jack Code:
K KRviator Guest Aug 25, 2012 #4 Same here. Aligning the ADAHRS using a stringline and testing magnetic interference from the Seatbelt cables. 3* from no cable to cable draped over ADAHRS. Close enough for RV work!
Same here. Aligning the ADAHRS using a stringline and testing magnetic interference from the Seatbelt cables. 3* from no cable to cable draped over ADAHRS. Close enough for RV work!
T Tuiliere flying a RV7 in France. Joined Mar 13, 2013 Messages 138 Location FRANCE Jul 26, 2015 #5 It would be fun if Dynon introduce and send a trail for RV7, like for the auto pilot servos. Sylvain