ADAHRS not current

[Doug94]

Ive updated my skyview system to 4.0 and my ADAHRS message says it is not current. When I went through the Network settings although it is still "yellowed out" it does not give me the option to update. Any recommendations on how to update the ADAHRS? it is a single Skyview and single ADAHRS system. Thanks

 

[dynonsupport]

Do a network configure, not just a network status and it will let you update it.

 

[Doug94]

I did the network configuration and still no prompt to update the ADAHRS. I'll try to upload 5.0 and see what happens??? Back to looking for some recommendations... thanks

 

[Doug94]

I've updated to 5.0.0.xxxx and everything works EXCEPT... I still get the ADAHRS Calibration Old message. When I do the network configuration is shows that it needs updating but there is no option to update the ADAHRS, just the finished button. Please help. Thanks

 

[dabear]

Try the "force network load." It will do it for all your modules, but it should work to force the upgrade to your ADAHRS.

 

[dynonsupport]

doug94 - I think you may have already been in touch with our support staff. If not, give them a ring at 425-402-0433 or an email at support@dynonavionics.com