Adding OAT, Altitude and IAS / TAS to EMS data log

[jgreen_sg]

I couldn't find anything in the archive on this. I have a D100 and D120 with my OAT sensor into the D100.
It would be really useful to have OAT, altitude and IAS on the D120 data log. Any way of doing this ?

 

[Dynon]

I don't think there is - the D120 will only log its own local OAT, and I believe that the whole "system" will see one at a time.

 

[jgreen_sg]

Thanks for the reply. Too bad!