aguiraf
Member
Just curious as to the difference in requirement to the the installation of ADHARS for both systems. One requires a tilt angle the other doesn't. Is it something that was done on the software of the Skyview ADHARS?
:-/
:-/
ADHARS Skyview vs. D10A
- Thread starter aguiraf
- Start date
- Joined
- Mar 23, 2005
- Messages
- 13,226
In the D10A, the ADAHRS is in the panel unit, but the magnetometer is remote (which means technically the ADAHRS is an ADARS).
In the SkyView, the ADAHRS is a real ADAHRS, with the attitude and magnetometer all in one unit.
The magnetometer and the ADARS need to be at the same angle. It's impossible for this not to be true in the SkyView system, but in the D10A you need to do this manually.
In the SkyView, the ADAHRS is a real ADAHRS, with the attitude and magnetometer all in one unit.
The magnetometer and the ADARS need to be at the same angle. It's impossible for this not to be true in the SkyView system, but in the D10A you need to do this manually.
aguiraf
Member
I understand now. Thank you for the reply. 